How Much Does a New Fence Cost in Montgomery County, TX?

If you are pricing a new fence, the honest answer to “how much?” is “it depends.” A short stretch of chain link and a long run of cedar privacy fence on sloped ground are two very different jobs, so here is a plain look at what actually moves the price.

What Drives the Price of a Fence

Most of the cost of any fence comes down to a handful of factors. Understanding them helps you read an estimate and compare options fairly.

• Material. The single biggest cost driver. Wood, chain link, and ornamental metal sit at very different price points, and even within wood there are grade and species differences.
• Length. Fences are usually figured by the linear foot, so the total footage of your property line matters a lot.
• Height. A six foot privacy fence uses more material and labor than a four foot fence over the same distance.
• Gates. Each gate adds hardware, framing, and labor. Wide drive gates cost more than a single walk gate.
• Terrain. Flat, open ground is the easiest. Slopes, tree roots, rock, and tight access all add time and sometimes special techniques.
• Removal of an old fence. Tearing out and hauling off an existing fence is its own line of work, especially if old posts are set in concrete.

When any one of these changes, the number moves. That is why two homes on the same street can get very different quotes.

Wood, Chain Link, and Ornamental Metal Compared

Material is where the biggest swings happen. Here is how the three most common choices in our area stack up in general terms.

Chain link is typically the most budget friendly option per linear foot. It is durable, low maintenance, and a practical pick for backyards, pet containment, and commercial sites. Galvanized and vinyl coated systems both hold up well when the posts are set in concrete and the fabric is properly tensioned.

Wood privacy fencing, usually cedar in our region, lands in the middle to higher range depending on grade, height, and details like a cap and trim board. You are paying for privacy, warmth, and curb appeal, and a well built cedar fence rewards that with years of service.

Ornamental metal, meaning steel or aluminum panel fencing, is generally the highest cost of the three. The trade off is strength, a refined look, and powder coated finishes that resist rust. It is a popular choice for front yards and any frontage where appearance counts as much as security.

None of these is “the cheap one” or “the expensive one” in every situation. A tall, long wood fence can cost more than a short ornamental section, and a basic chain link run can be very affordable. The right comparison is always for your specific property.

How Length, Height, and Gates Add Up

Because fencing is priced by the foot, total length is often the first thing that shapes a quote. A property with a long perimeter naturally costs more than a small yard, even with the same material.

Height matters because it changes how much material and labor each foot requires. Going from four feet to six feet, for example, means taller posts, more pickets or fabric, and more time per section.

Gates are easy to overlook but they each carry their own cost. Hardware, hinges, latches, and framing all add up, and a wide gate built for a vehicle takes more material and care than a simple walk gate. If you want two or three access points, plan for that in your budget.

How Terrain and Old Fence Removal Affect the Job

Two factors that surprise homeowners are the ground itself and whatever is already there.

In Texas, soil shifts and posts that are not set properly will lean within a season or two, so good footings are not optional. Sloped lots, rocky spots, large tree roots, and hard to reach areas all take extra time and sometimes extra technique, and that shows up in the price.

Old fence removal is a separate part of the work. Pulling pickets, panels, and posts, especially posts set in concrete, plus hauling everything away, adds labor and disposal. If your project is a replacement rather than a brand new line, this is worth asking about up front.

Why a Free Written Estimate Is the Only Real Answer

You can read every general guide on the internet and still not know what your fence will cost, because none of those guides have walked your property. The only way to get a number you can trust is to have someone measure the actual length, look at the terrain, count the gates you need, check on any old fence to remove, and confirm the material and height you want.

That is exactly what a free written estimate does. It turns “it depends” into a clear, itemized number for your specific job, with no guessing and no obligation. A written estimate also protects you, because everyone is working from the same agreed details rather than a rough phone guess.

When you ask for an estimate, it helps to know:

• The rough length of fence you need, or the property lines you want covered
• The height and material you are leaning toward
• How many gates, and whether any need to fit a vehicle
• Whether an old fence has to come out first

Even if you are not sure on all of these, that is fine. A good estimate visit will help you sort out the choices.

Get Your Free Fence Estimate

Terracotta Construction is locally owned, licensed and insured, and we install and repair every common fence type across Montgomery County and the Greater Houston area, including Montgomery, Conroe, The Woodlands, Magnolia, Willis, Tomball, Spring, Cypress, and Katy. Call us at (936) 955-4083 for a free, no obligation written estimate, and we will give you a real number for your property along with our satisfaction guarantee.